This special combination of RX35 parts called RED CLIX is designed for the professional coffee specialist. Both the shaft and the grinding grade dial are equipped with an ultra-fine precision thread. The main difference is the extended click range for the same particle size range and the same brewing methodology. The click steps with RED CLIX are much finer, but at the same time, the click engine itself is just as solid and stable as the standard version.
For example: if you currently use 25 clicks for your brewing methodology, with RED CLIX you now need 50 clicks. If you go up or down 5 clicks with the standard version, with RED CLIX you now need 10 clicks. RED CLIX actually gives you an extra step between two standard clicks. This can be useful if you want to optimize the extraction time for a given dose of lightly roasted specialty espresso coffee.
Technical specification:
For use with the C40 Nitro Blade
Horizontal displacement per click of Maximum Target in Bimodal Normal Distribution of total particles.
Particle size change per click (typical): 15 micron / 0.015 mm
Narrow blade gap at flash exit: 5.5 microns per click (typical)
Important : Only use the special red color grinding grade dial with this special RX35 shaft. The extra fine precision threads on both the shaft and dial are very delicate and will be damaged if used with any other parts. Please make sure you do not mix the Red Clix part with standard parts. Otherwise, the RX35 parts will be damaged and can no longer be used.
